ROBINSON wrote:Planned obsolescence is built into just about every manufactured item. It's nothing new.
If products don't become obsolete, then there is little incentive to buy replacements for that item. I do wonder how many people who moan about planned obsolescence have iPhones, for instance.
Spot on. No-one makes people buy their stuff, it's not compulsory.
Freedom without Socialism is privilege and injustice. Socialism without freedom is slavery and brutality.
Joined: May 10 2002 Posts: 47951 Location: Die Metropole
El Barbudo wrote:Spot on. No-one makes people buy their stuff, it's not compulsory.
Well you say that - and largely you're absolutely correct - but where I'd make a more nuanced comment is that most of consider that we have little choice but to own/buy a fridge or a washing machine.
A mobile is one thing - those are very different (as I have just found out, to my expense).
"You are working for Satan." Kirkstaller
"Dare to know!" Immanuel Kant
"Do not take life too seriously. You will never get out of it alive" Elbert Hubbard
"We are all in the gutter, but some of us are looking at the stars." Oscar Wilde
Joined: Dec 22 2001 Posts: 17134 Location: Johannesberg, South Africa
Mintball wrote:Well you say that - and largely you're absolutely correct - but where I'd make a more nuanced comment is that most of consider that we have little choice but to own/buy a fridge or a washing machine.
But you do have a choice of a very large number of both manufacturers and sellers.
Look back to when you were younger - how long did your parents or grandparents white goods last? I know my gran had a fridge bought in the 1940s that was still working in the 80s. Do you really expect yours to last that long? I don't.
It's the same with most products these days - cars, phones, computers; they all seem to have shorter lifespans than they did years ago. Surely that's the wrong way round?
God is nothing more than an imaginary friend for grown ups.
Scooter Nik wrote:It's the same with most products these days - cars, phones, computers; they all seem to have shorter lifespans than they did years ago. Surely that's the wrong way round?
The one exception there is cars, compared to 30 years ago cars will last much, much longer now, take a look around on the roads tomorrow and see how many 02 plates you can spot, those are ten year old cars and they are still passing MOT inspections and you will be hard pressed to see any rust marks on any of them - a ten year old car in the 1970s or even 80s was the one sat at the bottom of the pile of cars in the scrapyard.
AT THE RIPPINGHAM GALLERY .................................................................... ART PROFILE ................................................................... On Twitter ................................................................... On Facebook ...................................................................
Joined: Dec 22 2001 Posts: 17134 Location: Johannesberg, South Africa
Scooter Nik wrote:you do indeed, but they all play the same game.
Look back to when you were younger - how long did your parents or grandparents white goods last? I know my gran had a fridge bought in the 1940s that was still working in the 80s. Do you really expect yours to last that long? I don't.
It's the same with most products these days - cars, phones, computers; they all seem to have shorter lifespans than they did years ago. Surely that's the wrong way round?
I think that's a bit of a myth. I've had very few things fail. One washing machine at 20 years and the replacement has been going good for five. Perhaps one difference is we don't tend to repair stuff nowadays, but I expect my fridge to carry on, although it will more likely be replaced with one that warps food or something in a few years.
Joined: May 25 2002 Posts: 37704 Location: Zummerzet, where the zoider apples grow
A fridge should be the most reliable of all domestic goods. The motor/compressor sits in a bath of oil and is running on a virtually continuous basis and is rarely subject to peaks of power required to operate other household appliances, such as washers etc. It's extremely rare for a fridge motor to pack up, usually it's corrosion to other components or perished seals that cause problems
The older I get, the better I was
Advice is what we seek when we already know the answer - but wish we didn't
I'd rather have a full bottle in front of me than a full-frontal lobotomy ------------------------------------------------------------------------------------------------------------ kirkstaller wrote: "All DNA shows is that we have a common creator."
cod'ead wrote: "I have just snotted weissbier all over my keyboard & screen"
------------------------------------------------------------------------------------------------------------ "No amount of cajolery, and no attempts at ethical or social seduction, can eradicate from my heart a deep burning hatred for the Tory Party. So far as I am concerned they are lower than vermin." - Aneurin Bevan
Joined: Jun 05 2009 Posts: 5463 Location: Trapped in time. Surrounded by evil. Low on gas.
I'll relate this topic to wristwatches as I do with most threads that I contribute towards on this forum.
With the recent introduction of silicon into the watch industry it is now possible to manufacture watch calibers that will never require a service to regulate the time it tell's. A watches greatest enemy is friction (we'll conveniently forget vibration for the sake of this discussion) affecting both it's accuracy and longevity between services. The higher the watches beat rate/ oscillation of the balance wheel which is typically 28,800 beats per hour or 8 beats a second but can be as high as 43,200 BPH or 12 BPS, the more friction and stress parts suffer.
But it's not the parts that fail first but rather the lubricants dry up first with excessive wear leading to irregularity of time and subsequent damage to the watch. The late George Daniels creator of Co-Axial escapement that Omega laud so much, has gone a long way towards abolishing this friction of the escapement but not entirely within the watch. However with the advent of silicone and the friction free properties that it possesses, it enables calibers to be produced without the need for lubricants at all, therefore now making it possible to produce watches that will never require a service. A high end product that will do it's job and last for ever, within reason of course.
I'll relate this topic to wristwatches as I do with most threads that I contribute towards on this forum.
With the recent introduction of silicon into the watch industry it is now possible to manufacture watch calibers that will never require a service to regulate the time it tell's. A watches greatest enemy is friction (we'll conveniently forget vibration for the sake of this discussion) affecting both it's accuracy and longevity between services. The higher the watches beat rate/ oscillation of the balance wheel which is typically 28,800 beats per hour or 8 beats a second but can be as high as 43,200 BPH or 12 BPS, the more friction and stress parts suffer.
But it's not the parts that fail first but rather the lubricants dry up first with excessive wear leading to irregularity of time and subsequent damage to the watch. The late George Daniels creator of Co-Axial escapement that Omega laud so much, has gone a long way towards abolishing this friction of the escapement but not entirely within the watch. However with the advent of silicone and the friction free properties that it possesses, it enables calibers to be produced without the need for lubricants at all, therefore now making it possible to produce watches that will never require a service. A high end product that will do it's job and last for ever, within reason of course.
Joined: Dec 22 2001 Posts: 17134 Location: Johannesberg, South Africa
Mintball wrote:Which means FA when everything fails after a certain point of time.
Which means FA as a statement. Everything fails after a certain point in time. I don't expect my TV to last a million years. Very, very few items fail in an unreasonable timeframe.
Users browsing this forum: No registered users and 171 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
